He pool maintenance It is one of the most important tasks in order to offer all the guarantees so that users can bathe safely.
Swimming pool water can undergo changes in its composition, which can make its properties very ineffective, both in terms of water hygiene and adverse reactions in bathers.
One of the products that are part of the maintenance of the pool water and are used to keep its conditions optimal is the hydrochloric acid .
Is hydrochloric acid important in swimming pools? What is it used for? Is it dangerous? Keep reading and we'll tell you everything you need to know about it. hydrochloric acid for swimming pool treatment .
What is hydrochloric acid?
He hydrochloric acid It is a very common substance that is also known as hydrogen chloride or muriatic acid. The formula is as follows: HCl . It is formed by a chlorine atom joined to a hydrogen atom.
He Hydrochloric acid is a colorless aqueous solution It is widely used in the chemical industry for the production of vinyl chloride, and in the production of pure hydrochloric acid. It is also used in the production of pharmaceuticals, food and beverages, and in the cleaning and maintenance of pool water , as we will see below.
Now you can buy the best hydrochloric acid in Spain from the web
What is hydrochloric acid used for in swimming pools?
He Hydrochloric acid is used in swimming pool water treatment to reduce the pH of the water .
He pH is a measure of the acidity or alkalinity of water , and is measured on a scale of 0 to 14, where a pH of 7 is neutral, a pH less than 7 is acidic, and a pH greater than 7 is alkaline.
Pool water tends to be alkaline due to the use of chemicals such as calcium hypochlorite or sodium hypochlorite, which are used to disinfect the water and keep it clean.
He Hydrochloric acid is used to lower the pH of pool water to a range between 7.2 and 7.8 , which is the recommended range to keep the water clean and safe for swimmers.
Hydrochloric acid is very reactive and highly corrosive, so It should be handled with caution and always following the manufacturer's recommendations .
It is recommended that the Hydrochloric acid is slowly added to the pool water while stirring and measuring the pH with a pH test kit to avoid an excessive reduction of it.
Related content
The importance of pH in pool water
As we have already mentioned, for To keep a pool in good condition, it is necessary to control the pH levels of the water.
Too high a pH can irritate skin and corrode pool components. If the pH is too low, pool chlorine may not be as effective.
The pH scale ranges from a minimum value of 0 to a maximum value of 14. Level 0 indicates the highest point of acidity in the water. A level of 14 indicates the maximum alkalinity value.
Therefore An optimal and balanced pH value in pool water is one that ranges between 7.2 and 7.6.
For more information about pH you can visit our article:
How to properly use hydrochloric acid in pool treatment
Keeping the pH of a pool under control is an ongoing task; the pH level must be checked regularly to ensure that there have been no major changes.
For this purpose, there are some very easy-to-use and effective analysis kits that show the pH level instantly. If you get inadequate levels, it is time to act and use the hydrochloric acid to balance water levels .
This is a task that can be done by oneself, but if you do not have enough information or experience, it is always advisable to hire a professional.
Note: Remember that hydrochloric acid is a dangerous substance to handle. Always handle it with protection.
What is the best way to use hydrochloric acid in the pool?
The best way to apply hydrochloric acid to a pool is to mix it first. Mix the appropriate amount of water in a bucket depending on the number of liters in the pool.
This helps to dilute the product, reducing the average density of the hydrochloric acid. Pour the solution into the deepest part of the pool and allow it to act.
It is important to read the product's instructions for use and to consult with professionals who can advise you.
Best Hydrochloric Acid Products for Swimming Pools
To achieve maximum efficiency in conditioning pool water, it is necessary to use professional products designed to balance the different parameters of its composition.
A good product is the Hydrochloric acid 20% for swimming pools , liquid product designed for lower the pH in water treatment . Concentrated and effective product that balances the pH values of pool water.
Finally, remember that the success of obtaining optimal conditions for pool water lies in continuous monitoring and the use of professional products to eliminate any imbalances in its composition.