The extractor hood is one of the elements of the kitchen that gets dirtiest, and that is usually most neglected to clean. For this reason, in this article we want to detail how to clean a stainless steel hood , both the professional ones, which we usually find in restaurants, and those in our own homes.
While the outside is usually cleaned almost daily, the inside is usually cleaned less frequently, accumulating grease and dirt that can be a serious problem for its functionality.
The extractor hood is a basic kitchen appliance that prevents odors, gases and fumes from spreading throughout the restaurant or home.
A dirty extractor hood will not perform its function properly and will give off unpleasant odours, which can be very harmful, especially in restaurants.
Hence the great importance of maintaining a weekly cleaning protocol which helps to avoid accumulating waste, and above all to eliminate the fat linked to cooking food.
For the cleaning extractor hoods You have to be extremely careful, and use specific products designed for your cleaning . Especially for stainless steel extractor hoods.
Let's see what they are Steps to follow to properly clean a stainless steel extractor hood Take note!
Steps to clean the extractor hood
Cleaning a stainless steel extractor hood is not a complex task, but it requires special care to avoid damaging its finish and to perform an efficient cleaning.
First of all, before commenting on the steps to follow to carry out an effective cleaning, it is necessary to advise the use of professional cleaning products , homemade solutions are not usually the best solution in the medium and long term.
Another pro tip is refrain from using sponges, cloths or metallic or rough scouring pads that may scratch the surface .
Below we list the steps you should follow to leave your stainless steel extractor hood looking like new.
Disassemble the extractor hood
For proper cleaning of the extractor hood, it must be disassembled. Generally, will remove the grill that covers the extractor hood motor .
It is usually a very simple and easy disassembly, which will not require tools.
Clean the hood grills
Once we have the grids separated from the extractor hood, we will proceed to clean them.
The Grease will be the most common element that will need to be cleaned , the procedure is very simple: spray with a specific degreasing product throughout the grate.
Leave it to sit for a few minutes and then wipe it with a clean cloth to remove the grease. Then clean the entire grate with soap and water and dry thoroughly.
Clean the filters
Filters are usually attached to the grille of the extractor hood. They can be disposable elements or an additional part of the extractor hood.
Disposable filters are used for domestic extractor hoods. These must be disposed of change it from time to time so that it does not lose its smoke filtration capacity . A dirty filter has a yellowish colour.
If it is another part of the extractor hood, the previous step will be carried out again, Apply a degreaser , let it sit for a few minutes and then rinse with water. In situations where there is a large volume of grease, it is recommended to soak the part in soap and water.
Clean the hood motor
At this point, we are going to clean the inside of the extractor hood. The motor part is an area that is impregnated with a lot of dirt and grease.
The procedure to follow is just as simple: apply a professional degreaser throughout the engine area.
Leave it to act for a few minutes (depending on the product used) and clean with soap and water. Recommended cloths are microfiber , as they are the softest and least aggressive.
Clean the inside of the hood
Now we will dedicate ourselves to Clean the inside of the entire extractor hood . The walls and various corners should be covered with degreaser and left to act.
Wipe with soap and water until the area is completely clean. Drying with a microfibre cloth is also important to avoid leaving the area wet.
Clean the outside of the hood
Last but not least, we will clean the outside of the extractor hood. exterior cleaning of a stainless steel extractor hood requires the use of a specific product for this type of surface.
Start with a special degreaser, which you will need to let sit for a few minutes. Then, remove the degreaser with a soft cloth and clean it with soap and water.
It is very important not to use abrasive elements or cleaning materials with brush strokes here. A simple sponge or the aforementioned microfibre cloth will suffice.
Once the area is dry, the grid and filters will be installed.
In this simple way you will be able to leaving your stainless steel extractor hood clean and shiny.
Related content
- Cleaning and disinfection of restaurants. Plan and regulations
- How to clean stainless steel. Tips and best products
- How to clean the oven professionally
- Home Cleaning. How to Clean a House Deeply
Products to clean the stainless steel hood
One of the Key factors for successfully cleaning a stainless steel extractor hood lie in the materials and products to be used.
We have stressed throughout the text the importance of using professional products designed for cleaning these elements.
It is important to keep this in mind, as it will not only clean the hood correctly, but will also take optimal care of its surface.
If you wish professional cleaning products for professional kitchens , you can consult at:
If instead, you want to use For more effective and more economical professional products for cleaning your home , you can find more information at:
As you can see, cleaning a stainless steel extractor hood is a very simple task. It is important to clean it regularly, every two weeks is a very good frequency to keep an extractor hood perfectly clean.